Kvaser Leaf Light HS
 |
EAN Number: 73-30130-00241-8
The Kvaser Leaf Light supports full speed USB interface for CAN with high performance at a low cost. Kvaser Leaf Light is a reliable low cost product. Loss free transmission and reception of standard and extended CAN messages on the CAN bus is transmitted with a time stamp precision of 100 microseconds.
The Kvaser Leaf Light supports full speed USB interface for CAN with high performance at a low cost. Kvaser Leaf Light is a reliable low cost product. Loss free transmission and reception of standard and extended CAN messages on the CAN bus is transmitted with a time stamp precision of 100 microseconds.
| Description | Technical Specification | Downloads | Additional Images |
- The Kvaser Leaf Light supports full speed USB interface for CAN with high performance at a low cost.
- Kvaser Leaf Light is a reliable low cost product. Loss free transmission and reception of standard and extended CAN messages on the CAN bus is transmitted with a time stamp precision of 100 microseconds.
- The low current consumption, 70 mA, reduces the power drain from your laptop. Application Areas: Human Interfaces, testing equipment, different types of one channel tools, multi channel tools not requiring channel synchronization, etc.
| Property | Value | ||
|---|---|---|---|
| The information herein is subject to change without notice. | |||
| Galvanic Isolation | No | ||
| Bitrate | 5-1000 kbit/s | ||
| Silent mode | No | ||
| Error frame generation | No | ||
| Error frame detection | Yes | ||
| Weight | 100 g | ||
| Timestamp resolution | 100 | ||
| On board buffer | Yes | ||
| Maximum message rate, send | 8000 | ||
| Maximum message rate, receive | 8000 | ||
| Sound | No | ||
| Clock synchronization | N/A | ||
| Dimensions (WxLxH) | 25x100x20 mm (1.0x3.9x0.8in.) | ||
Driver
Kvaser LINUX Driver and SDK
linuxcan.tar.gz (Version V4.2) Linux driver and SDK. This is a BETA version for Kvaser PCIcan/PCIcanx, Kvaser PCIcanII, Kvaser PC104+, Kvaser PCIcanx II, Kvaser USBcan II, Kvaser Memorator*, Kvaser Leaf family, Kvaser Memorator Pro**, Kvaser USBcan Pro and VirtualCAN. For LAPcan an Release Notes 
Kvaser Drivers for Windows
kvaser_drivers_w2k_xp.exe (Version V4.5a) Windows drivers for all our CAN hardware. Please check release notes for information on which Windows versions are supported. It also contain a driver for the virtual CAN bus. Release Notes 
Kvaser DIADEM driver
kvaserdiadem.zip (Version 1.0.0) This free driver for National Instrument's DIAdem supports all CAN hardware from Kvaser. Firmware
Kvaser Device Firmware
firm_leaf_2_5_205.zip (Version V2.5.205) Firmware update for Kvaser Leaf (all types), Kvaser Memorator Professional, Kvaser Memorator SemiPro, Kvaser Memorator Light, Kvaser USBcan Professional, and Kvaser BlackBird. Release Notes Documentation
Kvaser Leaf Installation Guide
IS_98034_kvaser_leaf_install_guide.pdf (Version 4.1.0) Kvaser Leaf Installation Guide Development Kits and Tools
Kvaser LabView VI Library for CAN
kvCanVi.zip (Version V6.1.0) Library for National Instrument's LabView version for all Kvaser CAN hardware.
Kvaser CANlib SDK
canlib.exe (Version V4.4) Software development kit - everything you need to develop software for the Kvaser CAN and LIN interfaces. Link libraries, header files, sample programs, Microsoft Visual Basic and Borland Delphi components, documentation, and more. Note: you need to downl Release Notes
Kvaser CANKing
kvaser_canking_setup.exe (Version V5.2.779) A free of charge, general-purpose CAN bus monitor. Works with all CAN interfaces from Kvaser. Windows 2000 or later is recommended but Windows 98 should also work. Release Notes
cleanup.exe
cleanup.EXE (Version V3.9c) Driver removal program. This program will remove the CAN driver (version 3.9 or older) from your computer. This program will not work with driver 4.0 or later. Use it only if you need to remove an old version of the driver from your computer.
Kvaser CANKing
kvaser_canking_setup.exe (Version V5.2.779) A free of charge, general-purpose CAN bus monitor. Works with all CAN interfaces from Kvaser. Windows 2000 or later is recommended but Windows 98 should also work. Release Notes
Kvaser LINUX Driver and SDK
linuxcan.tar.gz (Version V4.2) Linux driver and SDK. This is a BETA version for Kvaser PCIcan/PCIcanx, Kvaser PCIcanII, Kvaser PC104+, Kvaser PCIcanx II, Kvaser USBcan II, Kvaser Memorator*, Kvaser Leaf family, Kvaser Memorator Pro**, Kvaser USBcan Pro and VirtualCAN. For LAPcan an Release Notes
Remove old drivers
cleanup_vector.exe (Version V3.9c) Driver removal program. This program will remove the CAN driver (version 3.2 or older) from your computer. This is a version intended for those who have installed CANLIB 3.2 or older. Use it only if you need to remove an old version of the driver from you Kvaser Software
Kvaser CANKing
kvaser_canking_setup.exe (Version V5.2.779) A free of charge, general-purpose CAN bus monitor. Works with all CAN interfaces from Kvaser. Windows 2000 or later is recommended but Windows 98 should also work. Release Notes
Kvaser CANKing
kvaser_canking_setup.exe (Version V5.2.779) A free of charge, general-purpose CAN bus monitor. Works with all CAN interfaces from Kvaser. Windows 2000 or later is recommended but Windows 98 should also work. Release Notes
Remove old drivers
cleanup_vector.exe (Version V3.9c) Driver removal program. This program will remove the CAN driver (version 3.2 or older) from your computer. This is a version intended for those who have installed CANLIB 3.2 or older. Use it only if you need to remove an old version of the driver from you
cleanup.exe
cleanup.EXE (Version V3.9c) Driver removal program. This program will remove the CAN driver (version 3.9 or older) from your computer. This program will not work with driver 4.0 or later. Use it only if you need to remove an old version of the driver from your computer. |
