Kvaser PCIEcan HS/HS
 |
EAN Number: 73-03130-00405-4
Kvaser PCIEcan is a CAN board for the PCI Express bus.
Kvaser PCIEcan is a CAN board for the PCI Express bus.
| Description | Technical Specification | Downloads | Additional Images |
The Kvaser PCIEcan is a CAN interface board, with
one or two CAN channels, for PCI Express bus systems. Galvanically
isolated CAN bus drivers to protect the hardware.
- Supports PCI Express x1
- Designed for standard and industrial computers
- Quick and easy plug and play installation
- Hardware compatible with the PCIcanx and PCIcan product families
- I/O mapped to enable quick reaction times
- Support CAN 2.0 A and 2.0 B (active)
- Detection and generation of error frames and remote frames
- SJA1000 CAN Controllers from Philips, with 64-byte receive FIFO
- Galvanically isolated CAN bus drivers
- Supports Silent Mode
- Dimensions 122 x 103 mm (approx. 4.8 x 4.0 in.)
- High-speed ISO 11898 compliant driver circuits
- Interfaces the CAN bus with DSUB CAN connectors. Pin assignment according to CiA-DS102
- 16 MHz CAN oscillator frequency
- Wide temperature range, -40°C - +85°C
- Supports the Kvaser Linx
- Patent Number: US 5,696,911, SE 501984, DE 19514696
| Property | Value | ||
|---|---|---|---|
| The information herein is subject to change without notice. | |||
| Galvanic Isolation | Yes | ||
| Bitrate | 0-1000 kbit/s | ||
| Silent mode | Yes | ||
| Error frame generation | No | ||
| Error frame detection | Yes | ||
| Weight | 100 g | ||
| On board buffer | No | ||
| Maximum message rate, send | 18000 | ||
| Maximum message rate, receive | 14000 | ||
| Sound | No | ||
| Clock synchronization | N/A | ||
| Dimensions (WxLxH) | 120x95x20 mm (4.7x3.7x0.8in.) | ||
Driver
Kvaser LINUX Driver and SDK
linuxcan.tar.gz (Version V4.2) Linux driver and SDK V4.75 BETA (updated July 23, 2009). This is a BETA version for Kvaser PCIcan/PCIcanx, Kvaser PCIcanII, Kvaser PC104+, Kvaser PCIcanx II, Kvaser USBcan II, Kvaser Memorator*, Kvaser Leaf family, Kvaser Memorator Pro**, Kvaser USBca Release Notes 
Kvaser DIADEM driver
kvaserdiadem.zip (Version 1.0.0) This free driver for National Instrument's DIAdem supports all CAN hardware from Kvaser. 
Kvaser Drivers for Windows 2000/XP/Vista/Windows 7
kvaser_drivers_w2k_xp.exe (Version V4.2) Windows 2000, XP, Vista, Windows 7 drivers for all our CAN hardware. For 32-bit and 64-bit systems. It also contain a driver for the virtual CAN bus. Release Notes Documentation
Kvaser PCIEcan Users Guide
UG_98049_pciecan_userguide.pdf (Version 2.0.0) Kvaser PCIEcan User's Guide Development Kits and Tools
Kvaser LINUX Driver and SDK
linuxcan.tar.gz (Version V4.2) Linux driver and SDK V4.75 BETA (updated July 23, 2009). This is a BETA version for Kvaser PCIcan/PCIcanx, Kvaser PCIcanII, Kvaser PC104+, Kvaser PCIcanx II, Kvaser USBcan II, Kvaser Memorator*, Kvaser Leaf family, Kvaser Memorator Pro**, Kvaser USBca Release Notes
Kvaser CANKing
kvaser_canking_setup.exe (Version V5.0) A free of charge, general-purpose CAN bus monitor. Works with all CAN interfaces from Kvaser. Windows 2000 or later is recommended but Windows 98 should also work. Release Notes
Kvaser CANlib SDK
canlib.exe (Version V4.2) Software development kit - everything you need to develop software for the Kvaser CAN and LIN interfaces. Link libraries, header files, sample programs, Microsoft Visual Basic and Borland Delphi components, documentation, and more. Note: you need to downl Release Notes
Remove old drivers
cleanup_vector.exe (Version V3.9c) Driver removal program. This program will remove the CAN driver (version 3.2 or older) from your computer. This is a version intended for those who have installed CANLIB 3.2 or older. Use it only if you need to remove an old version of the driver from you
cleanup.exe
cleanup.EXE (Version V3.9c) Driver removal program. This program will remove the CAN driver (version 3.9 or older) from your computer. This program will not work with driver 4.0 or later. Use it only if you need to remove an old version of the driver from your computer.
Kvaser LabView VI Library for CAN
kvcanvi_60.zip (Version 6.0.0) Library for National Instrument's LabView version for all Kvaser CAN hardware. Kvaser Software
Kvaser CANKing
kvaser_canking_setup.exe (Version V5.0) A free of charge, general-purpose CAN bus monitor. Works with all CAN interfaces from Kvaser. Windows 2000 or later is recommended but Windows 98 should also work. Release Notes
Remove old drivers
cleanup_vector.exe (Version V3.9c) Driver removal program. This program will remove the CAN driver (version 3.2 or older) from your computer. This is a version intended for those who have installed CANLIB 3.2 or older. Use it only if you need to remove an old version of the driver from you
cleanup.exe
cleanup.EXE (Version V3.9c) Driver removal program. This program will remove the CAN driver (version 3.9 or older) from your computer. This program will not work with driver 4.0 or later. Use it only if you need to remove an old version of the driver from your computer. |
