Kvaser PC104+

PC/104-Plus CAN interface board with 2 channels

Application support

MathWorks™ MATLAB® using Vehicle Network Toolbox™
MathWorks™ Simulink® using Vehicle Network Toolbox™
AFT MARC I™
ATI CANLab™ Network Analysis
ATI VISION™ Calibration        and Data Acquisition
Ficosa CANica™
Influx  Module Analyzer™
Kvaser CanKing™
National Instruments DIAdem™
National Instruments LabView™
Port CANopen Configuration™
PPE PCMSCAN™
TKE CANtrace™
TKE CANopen Configuration™
VAT 2000™
Warwick X-Analyser™
Xtm

Software Platforms

Windows 7, Windows Vista,
Windows 2000/XP/Server 2003,
Windows 98/ME, 
Windows NT4,
Linux

Hardware

• Compliant with the PC/104-Plus specification
• Stack-through connector
• On-board 16-bit microcontroller  
• Communicates with the PC through a fast DPRAM 
• CAN Controller from Renesas (M16C)
• Supports CAN 2.0 A and 2.0 B (active)
• Supports Silent Mode
• High-speed ISO 11898 compliant driver circuits, supports bit rates up to 1 Mbit/s
• Galvanic isolation between the CAN-controller and the CAN-driver
• CAN oscillator frequency: 16 MHz
• Quick and easy plug-and-play installation  
• Dimensions 91 x 96 mm (approx. 3.6 x 3.8 in.)
• Interfaces the CAN bus with IDC Headers or 9 pin DSUB connectors 
• Wide temperature range, -40°C - +85°C 

Note: the ISA bus connector is a pass-through connector. The card does not use the ISA bus. It is PCI only.

Software and Documentation 

• Documentation, software and drivers can be downloaded for free from www.kvaser.com, or they can be purchased on CD if preferred. Updates of the software are regularly posted on the web. The following free software is available for the Kvaser PC104+ board. 
• Driver routines: driver support for Windows 98/ME/2000/XP/2003/Vista/7 and Windows NT 4.0.
• Kvaser CANLIB SDK, which includes everything you need to develop software for the Kvaser CAN boards. Includes full documentation and many program samples, written in C, C++, Delphi, Visual Basic, and C#. All Kvaser CAN interface boards share a common software API. Programs written for one board type will run without modifications on the other board types! 
• RP1210A Application Programming Interface
• J2534 Application Programming Interface
• Kvaser CanKing, a general-purpose interactive CAN bus monitor. 
• Download the product sheet for Kvaser PC104+
• Download the user manual in PDF format 

Product versions 

• Kvaser PC104+ HS/HS (Item No. 00336-1)
  PC/104-Plus CAN interface board with dual channels and 10 Pin IDC Headers CAN connectors. Handles a bit rate from 5 kbits/s up to 1 Mbits/s. 
• Kvaser PC104+ HS/HS (Item No. 00352-1)
  PC/104-Plus CAN interface board with dual channels and 9 Pin DSUB CAN connectors. Handles a bit rate from 5 kbits/s up to 1 Mbits/s.