Kvaser PCcan HS is an End of Life product. Please contact support for replacement product or more information.

Kvaser PCcan HS

EAN: 73-30130-00050-6

The PCcan provides a CAN interface for ISA bus computers that supports 8-bit transfers.

Hardware

 

  • The board is a quarter-size (length 135 mm) 8-bit
    ISA bus board and occupies 64 bytes of I/O space. The base address can be
    any of 200H, 240H,
    300H, and 340H.
    The interrupt signal on the CAN controllers can be connected - under
    software control - to any one of IRQ 2/9, IRQ 3, and IRQ 5 on the ISA bus.
  •  

  • The original 16 MHz oscillator may be replaced with
    an oscillator of frequency range 1-24 MHz to obtain the required bit rate
    on the bus. The PCcan 4xHS board draws approximately 600 mA at 5V.
  • The industry-standard CAN controllers on the PCcan
    cards are directly accessible to the programmer. This makes the cards
    suitable for cross-platform development: you can develop your software on
    your PC and then move it, with a minimum of changes, to your embedded
    system.
  • The CAN controllers support CAN 2.0 A and 2.0 B
    (active.) The CAN bus drivers supports the standard, high-speed ISO11898
    physical layer.
  •  

 

External Connector

 

  • The outputs from the CAN circuits are connected to
    female D-SUB connectors via optocouplers and bus drivers
    (Philips 82C251, conforming to ISO 11898).
  • The connectors provide the voltage feed for the bus
    section (optocouplers and driver circuits). Alternatively the PC is used
    as power source; however this gives no galvanic separation between the
    computer and the CAN bus.
  • On the PCcan 4xHS card, it is possible to connect all
    the 4 CAN in/outputs to a common CAN bus, which is also connected to the
    CAN-connector.
  •  

Bitrate

-1000 kbps

Categories

Hardware

Certificates

CE

Channels

1

Connectors

DSUB 9

Error Counters Reading

Yes

Error Frame Generation

No

Galvanic Isolation

Yes

Height

20 mm

Interfaces

ISA

Length

65 mm

OS

Win XP, Linux, Win 7, Win Vista, Win 10, Win 8

Silent mode

Yes

Sound

No

Temp range

-40 °C to +85 °C

Timestamp Resolution (µs)

1 µs

Weight

100 g

Driver
Kvaser DIADEM driver

This free driver for National Instrument's DIAdem supports all CAN hardware from Kvaser.

Download
Version V4.1.0
Kvaser Drivers for Windows

Windows drivers for all our CAN hardware. Please check the release notes for information on which Windows versions are supported. The package also contains a driver for a virtual CAN bus, for testing and evaluation when you don't have access to a physical CAN bus.

Download
Version V5.44.630
Development Kits and Tools
Python module

The Canlib module is a Python wrapper for Kvaser CANlib SDK.

Download
Version V1.25.393
Kvaser LabView VI Library for CAN

Library for National Instrument's LabView. Version for all Kvaser CAN hardware.

Download
Version V23.1.0
Kvaser CANlib SDK

Software development kit - everything you need to develop software for the Kvaser CAN and LIN interfaces. Libraries, header files, sample programs for e.g. C, C++, C#, Visual Basic and Delphi, documentation, and more. Note: you need to download and install the appropriate device drivers separately.

Download
Version V5.44.630
Other
Kvaser CANKing

A free of charge, general-purpose CAN bus monitor. It works with all CAN interfaces from Kvaser and also with the virtual CAN bus.

Download
Version V6.26.654
Images

WE HAVE OVER UNIQUE SOFTWARE OPTIONS TO PAIR WITH KVASER HARDWARE

As well as having a premium global reseller network, Kvaser provides all it’s customers with access to a large number of tailored software that works perfectly with Kvasrer hardware.

checkmark

Bus Analysis

26 Software Partners in this category

Monitor and analyze CAN messages on the bus.  Check error codes, bus speed, and more.

checkmark

Calibration

9 Software Partners in this category

Software and tools use to measure and fine tune CAN bus systems with precision.

checkmark

CANopen

14 Software Partners in this category

Software libraries and software specializing in the CANopen protocol, widely used in the Industrial Automation market and beyond.

checkmark

Data Acquisition

10 Software Partners in this category

Software for data management and analysis in real-time and post-measurement. Some packages include provision for gathering video, gps and data from other sensors.

checkmark

Diagnostics

15 Software Partners in this category

Tools for developing diagnostic functionality in any system, including ECUs. These include pre-generated diagnostic software components that will help developers and engineers to create reliable diagnostic functions and sequences that work throughout the test chain.

checkmark

ECU Development

14 Software Partners in this category

Development platforms that enable the design of automotive subsystems, up to entire ECU networks.

checkmark

Protocol Stack

12 Software Partners in this category

Software libraries for developing CANopen slave or master devices. Available in C-code and supporting a range of MCUs, these stacks are proven in the field.

checkmark

System Development

20 Software Partners in this category

Software packages that aid in the development of high-quality systems for automation, automotive, and systems integration.

Kvaser-Compatible Software Provided by 120 Software Partners

See our entire list of 52 Technical Associates over 97 countries always ready to give you fully customized support.

labelpartView Partner List