Support Note How to install Kvaser hardware under Vector CANalyzer/CANoe/.. This Support note comprises two sections.  1. How to install CANalyzer 5.2 with Kvaser hardware. It also explains the basics on how to set up a configuration in CANalyzer with several CAN and LIN channels.  How to install CANalyzer 5.2 with Kvaser hardware >> 2. General information for Vector software. General instructions on how to glue Kvaser hardware with newer and older Vector software versions. This is where you go if you need general information or have any problems, please select installation guide after Software version.  Note - Officially, not all of Kvaser products are supported under all Vector software versions. Click here to get an overview >> CANalyzer/CANoe 4.1 (SP 2) or higher versions >> CANalyzer/CANoe 4.1 (SP 1) or lower versions >> Contact our Support Team. Back to Support Notes Index >>