Support Note Time synchronization through Kvaser MagiSync™.  Kvaser MagiSync™ is patented by Kvaser and it represents one of Kvaser's key technologies. Time synchronization is needed to achieve accurate and precise time stamping between several PC-to-bus interfaces connected to one PC. Since each PC-to-bus interface uses its on-board clock to set the time stamps.  Kvaser MagiSync™ is a new innovative way to synchronize several different Kvaser Leaf interfaces. You do not need external cables - you get instant synchronisation when you connect the Kvaser Leafs. All product versions of Kvaser Leaf Professional and Kvaser Leaf SemiPro possess this feature. Kvaser MagiSync™ is patented solution and represents one of Kvaser's key technologies. Frequently Asked Questions How do I connect the Kvaser Leafs?  Use any standard PC with a USB host or USB hub. Can I use several hubs?  Yes, of course, but the Kvaser Leafs must be on the same root hub for the Kvaser MagiSync™ to work. This means that you need to connect your hubs in a tree-like structure so they all are connected to the same root hub. Can I verify which Kvaser Leafs are synchronized?  Yes, use the “Kvaser Hardware” software program (it's in the Control Panel) to identify a MagiSync™ group.  More Information The technically inclined will find more information about Kvaser MagiSync™ here.   Contact our Support Team. Back to Support Notes Index >>