Support Notes
	All Support Notes
	A list with all support notes, including old support notes. To find what you are looking for, we do recommend you to use the search function under [Sitemap -> Search]
	How can I verify an configuration?
	USBcan II/Memorator/PCIcan II firmware 2.8 -> 2.9 M16C/NA vs. M16C/N4 CPU change
	Kvaser hardware and driver guide for Vector software
	How to install Kvaser hardware under Vector CAnalyzer/CANoe
	Leaf - Time synchronization through Kvaser MagiSync
	OS Support Matrix
	Where can I find the drivers I need?
	Driver and Hardware Installation Guides for Windows
	Driver Upgrade Guide for Windows
	Driver Removal Guide for Windows
	Driver and Hardware Installation Guide for Linux
	Firmware updates
	How to upgrade the firmware
	Wintransfer
	Pin configuration of the CAN bus connectors
	Pin configuration of the LIN bus connectors
	Set up and configuration program for Kvaser Memorator
	Install Kvaser hardware under CANalyzer/CANoe.
	How to test that the KVASER CAN hardware is working properly.
	Pin configuration of KVASER hardware (CAN-bus and LIN-bus).
	Read the licenses on you KVASER hardware.
	Can Vector and KVASER drivers co-exist peacefully?
	I have KVASER hardware errors in CANalyzer 4.1 SP2 or later!
	Board error 113 when using CANalyzer 4.1 and Kvaser Memorator
	I have problems to update the firmware of my LAPcan card!
	Update the firmware of your Memorator / USBcan II and troubleshooter
	Update the firmware using WinTransfer (if nothing else works)
	Bit rates, sample points and cable length.
	Bit timing calculator.
	CAN and LIN connector pinning.
	Install driver package for LAPcan and PCIcan on Linux
	Install LAPcan I/II driver (WinNT4)
	Uninstall LAPcan I/II driver (WinNT4)
	VERIFY installation and help to LAPcan I/II driver (WinNT4)
	Which channel is connected to my hardware?
	Win98: Long delays before CANalyzer/DIAdem/other starts measure!
	Read which software-licenses your LAPcan I/II got.
	Supported Hardware Platforms For LAPcan
	Driver Support For Other Operating Systems
	Using LAPcan With An ISA- or PCI-bus PCMCIA Adapter
	How to remove the LAPcan/PCcan driver
	Computer with LAPcan freezes or resets
	Problems with NT4 and CardWizard PCMCIA s/w
	Problems with NT4 and SoftEx PCMCIA s/w
	DRVcan-S (SWC) can't send Wakeup frames
	Install driver package for all KVASER Hardware
	Uninstall driver package for all KVASER Hardware
	Verify and troubleshoot installation of the driver package
	In the Device Manager my HW pops up as "Unknown Device"
	"The system can not find the file specified file" error while installing.
	Install driver (Win98/2000/ME/XP)
	Uninstall driver (Win98/2000/ME/XP)
	Verify installation of driver (Win98/2000/ME/XP)
	Upgrade a installation of single driver (Win98/2000/ME/XP)
	I still have problems but verification is OK! (Win98/2000/ME/XP)
	PCcan can't use IRQ9 on some machines
	Problems with LAPcan, NT4 and CardWizard/SoftEx
	How to install the KVASER DIAdem driver
	How to install the Vector DIAdem driver
	How to really update the driver routines
	How to install the virtual CAN driver (PDF)
	Can I use LAPcan driver and with a CANcardX?
	I have problems to swap from CANcardX to LAPcan drivers!
	Kvaser Hardware installation damaged my CANcardX installation!
	CANlib 3.2 driver unpack instructions.
	How do I install the virtual CAN driver?
	Where are my bus load figures and bus statistics?
	How do I convert from CAPL-script to USR-script?
	PCIcan driver gives error message "Channel c02c0c runaway"
	PCIcan driver gives error message "EAN Number corrupt"
	PCcan can't use IRQ9 on some machines
	Driver Support For Other Operating Systems
	Can I run USBcan under Windows NT 4.0?
	How do I change the bit rate of the WAVEcan?
	You have an old/false version of CANcardX drivers installed...
	The hardware associated with CAN channel X is not present!
	Error 3014 from the CANalyzer
	Important CANalyzer/CANoe 3.0 installation note
	How to use different DRVcan modes from a CAPL program
	How to send high voltage signals using a DRVcan-S
	How to configure the CANalyzer (or CANoe) for more than two channels
	Can't run CANalyzer / CANoe 2.5 on Windows 2000
	Board error 113 when using CANalyzer 4.1 and Kvaser Memorator
	CANalyzer stays "Fatal Error, CAN driver stub: CAN driver not found"
	CANsetter says driver not supported
	On the throughput of CANKing
	The CANking Home Page
	Installation instructions for Vector's  DIAdem driver on LAPcan
	Installation instructions for Kvaser's  DIAdem driver on LAPcan
	IPEconf says that CAN hardware is not found or "READ TIMEOUT".
	How do I install KVASER's LABview driver ?
	Are The Import Libraries Corrupt?
	Some Error Codes From The LAPcan Driver
	Is LAPcan Compatible With Softing's CANcard?
	Borland C++ Builder problem
	Error message "Corrupt Installation Detected"
	"No license available" and similar messages
	Applications using sing32.dll fail under Win2000
	Problems accessing the Kvaser FTP server
	Error message "Corrupt Installation Detected"
	"No license available" and similar messages
	Applications using sing32.dll fail under Win2000
	Problems accessing the Kvaser FTP server
	MCP2510 Evaluation Board Window says "no printer port present"
	CANking 3.2.1.175 can't run under a normal NT account
	CANking 3.2.1.175 sometimes won't run under Windows NT
	How To Really Reinstall the Windows 95 Drivers
	How to remove the LAPcan/PCcan driver (version 2.6 or older)
	USBcan II/Memorator/PCIcan II firmware 2.8 -> 2.9 M16C/NA vs. M16C/N4 CPU change
	Contact our Support Team