Support Note Which channel is connected to my hardware? We present two methods to locate the channel you are using in your applications or Software tools.  Furthermore, if you are using a USB device, you can use "Kvaser Hardware" to flash the LEDs on each device. Simply right click on the device in "Kvaser Hardware" that you wish to flash. And Press "Locate Hardware (Flash LEDs)". If you are using Kvaser Memorator or Kvaser USBcan II/Kvaser USBcan Rugged, you must have installed firmware version 2.5 or higher.  1. Use "Kvaser Hardware". In the Control Panel, double click on the icon labeled "Kvaser Hardware". In the menu, select Channel Info. You will now see a list of the all Kvaser hardware connected to your PC. You will find the information under the column labeled "Channel".      2. Use "List CAN channels". Select Start -> Programs -> KVASER CANLIB SDK -> List CAN channels. You will now see a window like the one shown below. You can locate the channel(s) for each Kvaser hardware under the column labeled "Channel". Double click on a row to see detailed information.     Contact our Support Team. Back to Support Notes Index >>