Below are the suggested replacement products for the Kvaser PCcan 4xHS.
If you have any questions or concerns please contact us for more information.
Kvaser PCcan 4xHS
The PCcan provides a CAN interface for ISA bus computers that supports 8-bit transfers.
- The board is a quarter-size (length 135 mm) 8-bit
ISA bus board and occupies 64 bytes of I/O space. The base address can be
any of 200H, 240H,
300H, and 340H.
The interrupt signal on the CAN controllers can be connected - under
software control - to any one of IRQ 2/9, IRQ 3, and IRQ 5 on the ISA bus.
- The original 16 MHz oscillator may be replaced with
an oscillator of frequency range 1-24 MHz to obtain the required bit rate
on the bus. The PCcan 4xHS board draws approximately 600 mA at 5V.
- The industry-standard CAN controllers on the PCcan
cards are directly accessible to the programmer. This makes the cards
suitable for cross-platform development: you can develop your software on
your PC and then move it, with a minimum of changes, to your embedded
- The CAN controllers support CAN 2.0 A and 2.0 B
(active.) The CAN bus drivers supports the standard, high-speed ISO11898
- The outputs from the CAN circuits are connected to
female D-SUB connectors via optocouplers and bus drivers
(Philips 82C251, conforming to ISO 11898).
- The connectors provide the voltage feed for the bus
section (optocouplers and driver circuits). Alternatively the PC is used
as power source; however this gives no galvanic separation between the
computer and the CAN bus.
- On the PCcan 4xHS card, it is possible to connect all
the 4 CAN in/outputs to a common CAN bus, which is also connected to the
Win XP, Linux, Win 7, Win Vista, Win 10, Win 8
-40 °C to +85 °C
This free driver for National Instrument's DIAdem supports all CAN hardware from Kvaser.
Windows drivers for all our CAN hardware. Please check the release notes for information on which Windows versions are supported. The package also contains a driver for a virtual CAN bus, for testing and evaluation when you don't have access to a physical CAN bus.
The Canlib module is a Python wrapper for Kvaser CANlib SDK.
Library for National Instrument's LabView. Version for all Kvaser CAN hardware.
Software development kit - everything you need to develop software for the Kvaser CAN and LIN interfaces. Libraries, header files, sample programs for e.g. C, C++, C#, Visual Basic and Delphi, documentation, and more. Note: you need to download and install the appropriate device drivers separately.
WE HAVE OVER UNIQUE SOFTWARE OPTIONS TO PAIR WITH KVASER HARDWARE
As well as having a premium global reseller network, Kvaser provides all it’s customers with access to a large number of tailored software that works perfectly with Kvasrer hardware.
Bus Analysis26 Software Partners in this category
Monitor and analyze CAN messages on the bus. Check error codes, bus speed, and more.
Calibration9 Software Partners in this category
Software and tools use to measure and fine tune CAN bus systems with precision.
CANopen14 Software Partners in this category
Software libraries and software specializing in the CANopen protocol, widely used in the Industrial Automation market and beyond.
Data Acquisition10 Software Partners in this category
Software for data management and analysis in real-time and post-measurement. Some packages include provision for gathering video, gps and data from other sensors.
Diagnostics15 Software Partners in this category
Tools for developing diagnostic functionality in any system, including ECUs. These include pre-generated diagnostic software components that will help developers and engineers to create reliable diagnostic functions and sequences that work throughout the test chain.
ECU Development14 Software Partners in this category
Development platforms that enable the design of automotive subsystems, up to entire ECU networks.
Protocol Stack12 Software Partners in this category
Software libraries for developing CANopen slave or master devices. Available in C-code and supporting a range of MCUs, these stacks are proven in the field.
System Development20 Software Partners in this category
Software packages that aid in the development of high-quality systems for automation, automotive, and systems integration.
Kvaser-Compatible Software Provided by 120 Software Partners
See our entire list of 52 Technical Associates over 97 countries always ready to give you fully customized support.View Partner List