DIN Rail

Using DINRail SE410S-X10 as CAN FD translator

In this document I will show how to use a Kvaser DINRail as a CAN FD to CAN translator. I will use a database with defined signals and show how to use them in a t-program. The new Kvaser DIN Rail SE410S-X10 allows a standalone CAN translation unit to be created that does not need...

October 26, 2021 Lars-Göran Fredriksson
Click to Read

Comparing CAN interface transfer delays

Testing four different types of Kvaser CAN interfaces in order to compare the difference in transfer delay between interface types.

June 17, 2020 Lars-Göran Fredriksson
Click to Read

A Fictional Use Case With Kvaser DIN Rail and t programming

In order to create a fictional use case, let us assume that the company we are working for are installing a dangerous machine on the factory floor. The machine is surrounded by a fence with access to the machine through a single gate, see Figure 2. Figure 2: Overview of installation with fence, gate sensor,...

February 25, 2020 Magnus Carlsson
Click to Read