MEET THE INNOVATIVE KVASER U100

The Most Flexible, Rugged and Intuitive CAN & CAN-FD
to USB Interface We’ve Ever Built

The New Industry Standard

LED Interface

The Kvaser U100 has an all-new, intuitive LED interface. Two high-visibility LED bars give realtime feedback on CAN traffic status, showing busload and error codes.

 

Learn how the innovative LED display works >>

Electrically Robust

Connected to a system with different electrical potentials, the Kvaser U100 mitigates the risk of disturbance caused by current leakage to measurements on the system under test. Able to withstand voltage stress over a much longer timescale than equivalent interfaces, the Kvaser U100 is both electrically and physically robust.

Ruggedized Design

The Kvaser U100 is made to operate in tough environments, with IP67 water and dust resistance, reinforced galvanic isolation. (Tested according EN 60335-1:2012 paragraph 13, 5000VAC rms applied for 60 seconds) and an operating temperature of -40° C to +85° C.

More Flexibility

Compatible with J1939, CANopen, NMEA 2000® and DeviceNet. Supported on Windows and Linux (incl. SocketCAN).

Kvaser U100 CAN/CAN-FD to USB Interface

Buy Now

Connectors For A Variety Of Applications

U100-X1

Kvaser U100-X1 (01266-0) has a 9-pin J1939-13 Type II CAN connector.

Learn More

U100-X2

Kvaser U100-X2 (01267-7) connects to CAN via a 5-pole M12 connector

Learn More

U100-X3

Kvaser U100-X3 (01268-4) has a 16-pin OBDII plug.

Learn More

Compatible With

Key Features:

  • Supports CAN FD, up to 8 Mbit/s (with correct physical layer implementation).
  • Supports both 11-bit (CAN 2.0A) and 29-bit (CAN 2.0B active) identifiers.
  • Powered through the USB connector.
  • Supports bit rates from 10 Kbit/sec up to 1 Mbit/sec.
  • Lightweight, glass fiber reinforced polyamide housing, overmolded with TPE.
  • IP67 rated.
  • DB-9 connector (other connectors available soon).
  • Intelligent LED UI.
  • Reinforced galvanic isolation, design validated with 5000 VAC RMS applied for 60 seconds.
  • Industrial grade temperature range, −40 °C to +85 °C.
  • 20,000 msg/s, each timestamped with a resolution of 100 µs.
  • Support for SocketCAN.
  • Compatible with J1939, CANopen, NMEA 2000® and DeviceNet.
  • Fully compatible with applications written for other Kvaser CAN hardware with Kvaser CANlib.

Learn More

The Kvaser U100P

Made For Developers
The ‘Precision’ version of Kvaser’s U100 range delivers advanced features for engineers working in system development and difficult troubleshooting situations. Get more precise, synced time measurements, listen to the bus in silent mode, and utilize object buffers.

  • MagiSync (™)
  • Silent Mode
  • Object Buffers
  • 1 µs resolution timestamping
Learn More