The Memorator series of dataloggers does not have a built-in way to perform playback.
In order to playback a stream of recorded CAN messages onto the bus, there are two options:
1. Extract the recorded data from the Memorator to a desired format. Then write a software application using our CANlib SDK to play the messages back on the bus using the Memorator Professional or other Kvaser USB to CAN interface (see products).
2. Kvaser also has several Technical Associates (TA’s) whose software supports playback. This would mean:
a) extracting the data from the Memorator to a format that the TA software supports, then
b) running the TA software to play the data back on to the bus using the Memorator Professional or other Kvaser USB to CAN interface.
TA software can be found on our “Associate Software” page: https://www.kvaser.com/products-services/associate-software/
Use the filters on the right side of the screen to limit the number of applications to only “Bus Analyzers”. Visit these software pages to confirm the playback feature.