Kvaser Air Bridge Light HS M12 (FCC)

EAN: 73-30130-01148-9
Price: USD 1,090.00

 The Kvaser Air Bridge Light HS M12 is a configuration-free wireless CAN bridge that uses a dust and water-tight M12 connector to connect CAN networks. 

Comprising a preconfigured pair of plug-and-play units, with integrated antennas and rugged housings, the Kvaser Air Bridge Light HS M12 ensure the rapid exchange of raw CAN data in situations that make wired connection unsuitable or challenging, such as CAN cabling that experiences high environmental abrasion.

Employing a proprietary 2.4G radio and frequency hopping mechanism, the Kvaser Air Bridge Light HS controls the data rate, radio packet format, output power and pairing method to achieve predictable latencies, without sacrificing stability or range. Transmission range is as much as 70 m, with a maximum data rate of 1200 messages per second and a packet latency of 4.8 ms. This makes the Air Bridge effective in infrastructure and control applications, where accurate message delivery times are essential, and a viable alternative for optical cable in some situations.

There are two versions: (01141-0) Kvaser Air Bridge Light HS M12 is approved for the European Union, while (01148-9) Kvaser Air Bridge Light HS M12 (FCC) complies with US certification. Both share the same functionality but have different radio transmission schemes due to regulatory differences.
 

Major Features

  • A preconfigured pair of units that create a point-to-point radio link between two CAN networks.
  • 2.4 GHz proprietary protocol.
  • Internal antenna design, antenna output power max 18 dBm.
  • Automatic baud rate detection (125K, 250K, 500K, 1M).
  • Supports both 11-bit (CAN 2.0A) and 29-bit (CAN 2.0B active) identifiers.
  • High-Speed CAN connection (compliant with ISO 11898-2), up to 1 Mbit/s.
  • Power supplied through the CAN bus interface.
  • Rugged aluminum housing.
  • Dust and water-resistant M12 connector on each unit.
  • Plug and play, driver-free, and configuration-free.
  • Fully compatible with J1939, CANopen, NMEA 2000 and DeviceNet.
  • Extended operating temperature range from -40 to +70 °C.
  • Note: Error Frames and Arbitration information are not transmitted by the Air Bridge units across the wireless link.

Warranty
2-Year Warranty. See our General Conditions and Policies for details. Register your product at www.kvaser.com/getting-started for an additional 1-year Warranty Extension.

Support
Free Technical Support on all products available by contacting [email protected]

Certifications
The Kvaser Air Bridge Light HS (FCC) (EAN: 73-30130-01008-6) has been tested and found to comply with part 15 of FCC Rules. See User Guide for full FCC Compliance Information Statement.

The Kvaser Air Bridge Light HS (EAN: 73-30130-00808-3) has been tested and declared to be in conformity with the relevant Union harmonisation legislation Radio Equipment Directive (RED) 2014/53/EU (Art. 3.1a, 3.1b, and 3.2) and RoHS recast Directive 2011/65/EU (Art. 4.1). See User Guide for full EU Declaration of Conformity.

Categories

CABLES, Interfaces, Hardware, CAN, Accessories

Certificates

CE, RoHS

Channels

1

Connectors

M12 5 pin

Current Consumption

Allowed operating voltage 9 V-36V DC. Maximum input voltage 48 V DC. Approx. 2 W.

Galvanic Isolation

Yes

Height

17 mm

Length

151 mm

Material

Aluminium

Messages Per Second Receive

1200 mps

Messages Per Second Sending

1200 mps

Silent mode

No

Sound

No

Temp range

-40 °C to +70 °C

Weight

200 g

Documentation

Kvaser Air Bridge Installation Guide

Kvaser Air Bridge Installation Guide

Version V1.0.220908 Download

Kvaser Air Bridge System Integration Guide

Kvaser Air Bridge System Integration Guide

Version V1.0.220908 Download

Kvaser Air Bridge Light HS User's Guide

Kvaser Air Bridge Light HS/HS (FCC) User's Guide

Version V4.1.220908 Download

WE HAVE OVER UNIQUE SOFTWARE OPTIONS TO PAIR WITH KVASER HARDWARE

As well as having a premium global reseller network, Kvaser provides all it’s customers with access to a large number of tailored software that works perfectly with Kvasrer hardware.

checkmark

Bus Analysis

26 Software Partners in this category

Monitor and analyze CAN messages on the bus.  Check error codes, bus speed, and more.

checkmark

Calibration

9 Software Partners in this category

Software and tools use to measure and fine tune CAN bus systems with precision.

checkmark

CANopen

13 Software Partners in this category

Software libraries and software specializing in the CANopen protocol, widely used in the Industrial Automation market and beyond.

checkmark

Data Acquisition

10 Software Partners in this category

Software for data management and analysis in real-time and post-measurement. Some packages include provision for gathering video, gps and data from other sensors.

checkmark

Diagnostics

15 Software Partners in this category

Tools for developing diagnostic functionality in any system, including ECUs. These include pre-generated diagnostic software components that will help developers and engineers to create reliable diagnostic functions and sequences that work throughout the test chain.

checkmark

ECU Development

14 Software Partners in this category

Development platforms that enable the design of automotive subsystems, up to entire ECU networks.

checkmark

Protocol Stack

12 Software Partners in this category

Software libraries for developing CANopen slave or master devices. Available in C-code and supporting a range of MCUs, these stacks are proven in the field.

checkmark

System Development

19 Software Partners in this category

Software packages that aid in the development of high-quality systems for automation, automotive, and systems integration.

Kvaser-Compatible Software Provided by 118 Software Partners

See our entire list of 52 Technical Associates over 97 countries always ready to give you fully customized support.

labelpartView Partner List