- 0USD 0.00
- CAN HardwareBy Kvaser
- CAN SoftwarePartner Directory
- About CAN
- SupportKvaser Help Support
- Kvaser Career00
‘Enlightening’ and ‘extremely useful’ were a couple of the comments made by attendees of Kvaser’s Protocol Day on 27th January 2014.
It’s a fact of life that technology that starts out in cars is invariably applied to motorbikes and vice versa, and it is certainly the case for CAN. However, whilst automotive datalogging for road and race applications is well developed, the size and lack of flexibility of most CAN interfaces mean that they haven’t lent themselves to motorbike datalogging, until now.
Electric RaceAbout (ERA), an engineering project run by Helsinki Metropolia University of Applied Sciences in collaboration with the prestigious Institute of Design, Lahti Polytechnic, is using Kvaser’s Eagle CAN interface and datalogger in the Battery Management System of its Electric sports car.
Chris Whiteford has started to build an advanced aerodynamic sensing network that, coupled with data from computer models from CFD / wind tunnel and real world testing, will optimise aerofoil positioning on race cars for maximum efficiency, completely automatically. Kvaser’s Memorator CAN datalogger and interface is being used to program the sensing network …
Kvaser presented CAN-EF (Controller Area Network – Enhanced Format) to attendees of the 14th International CAN Conference in Paris, France. CAN-EF proposes an intermediate step between CAN and the new high performance CAN with Flexible Data Rate (CAN-FD) solution that is in the process of being integrated within ISO 11898-1.
The Kvaser Mini PCI Express HS is a highly integrated CAN add-on board that adds a single, high speed controller area network (CAN) channel to any standard computer board with mini PCI Express capability.
Kvaser announces the BlackBird v2 HS CAN 2.0 to WLAN interface. An upgrade to Kvaser’s original BlackBird CAN to WLAN interface, the BlackBird v2 incorporates a new radio chip that gives it up to 75% better range.
Washington, USA-based Phytools has become a Qualified Sales Representative (QSR) for Kvaser.
Kvaser became the first independent third-party supplier of CAN FD modules to present a solution communicating with a Bosch CAN FD evaluation board at the first CAN FD Technical Day, held in Detroit, Michigan.
Kvaser announces an updated version of its well-known Leaf Light CAN to USB interface. Evolution of the successful predecessor sees galvanic isolation become a standard feature of the new look interface, which is sleeker than ever.