If you need to power a Kvaser CAN interface on a development board, or an interface device without internal power such as Kvaser’s BlackBird or Memorator series, the Kvaser DB9 power input (00973-8) is the simplest and safest way of doing so.

The Kvaser DB9-Power Inlet is a power injector for Kvaser CAN interfaces, taking power from a DC power jack into one female D-SUB9 connector. It also has one unpowered male D-SUB9 connector to connect to the CAN network. The device connects to a power supply using a standard 2.0 mm DC power connector and a complementary 12 V, 1A power supply is included.